top of page

Help Needed Worldwide

Public·7 members
Mateo Gonzalez
Mateo Gonzalez

Chrysler Voyager Radio Code Generator: The Best Way to Restore Your Radio


Chrysler Voyager Radio Code Calculator




Have you ever experienced the frustration of turning on your Chrysler Voyager radio only to see a message that says "CODE" or "LOCKED"? If so, you are not alone. Many Chrysler owners have faced this problem after disconnecting their battery, replacing their radio, or servicing their car. This is because your radio has an anti-theft feature that requires you to enter a four-digit code to unlock it.




chrysler voyager radio code calculator



But what if you don't have your code or you have lost it? Don't worry, there is a solution. You can use a Chrysler Voyager radio code calculator to generate your code online. A radio code calculator is a software tool that uses your radio serial number to calculate your unlock code. In this article, we will show you how to find your serial number, how to use a radio code calculator website, how to enter your code, and how to enjoy your radio again.


How to Find Your Chrysler Voyager Radio Serial Number




The first step to unlock your radio is to find your Chrysler Voyager radio serial number. This is a unique identifier that is printed on a label on your radio or displayed on your screen. You will need this number to use a radio code calculator website.


There are two ways to find your serial number: by removing your radio or by displaying it on screen.


How to Remove Your Chrysler Voyager Radio




If you want to find your serial number on the label of your radio, you will need to remove it from the dashboard. This is not a difficult task, but you will need some tools and patience. Here are the steps to follow:



  • Turn off your ignition and remove the key.



  • Use a flat-head screwdriver to pry off the trim panel around the radio. Be careful not to damage the plastic or scratch the surface.



  • Unscrew the four screws that hold the radio in place. You may need a Phillips or Torx screwdriver depending on the model of your radio.



  • Pull out the radio gently and disconnect the wiring harnesses and antenna cable from the back of the radio.



  • Locate the serial number on the label on the top or side of the radio. It should start with T, Q, or TC and have eight digits. Write it down or take a picture of it.



  • Reconnect the wiring harnesses and antenna cable to the back of the radio.



  • Slide the radio back into the dashboard and secure it with the four screws.



  • Snap the trim panel back into place.



How to Display Your Chrysler Voyager Radio Serial Number on Screen




If you don't want to remove your radio, you can also find your serial number on your screen. This is a faster and easier method, but it may not work for all models of radios. Here are the steps to follow:



  • Turn on your ignition and turn on your radio.



  • Press and hold the 1 and 6 buttons on your radio for a few seconds until you see a code on your screen. This code is not your unlock code, but part of your serial number.



  • Write down or memorize the first four digits of this code. This is the first part of your serial number.



  • Press and hold the 2 and 6 buttons on your radio for a few seconds until you see another code on your screen. This is the second part of your serial number.